Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Abstract: Front wheel bearing replacing.

Applies to: 2004 through 2009 Model Year Prius

Before Performing any Work

Please read Cautions and Warnings before proceeding with any work on your vehicle

  • Raise and support vehicle safely.
  • Remove front wheel.
  • Remove front wheel speed sensor.
  • Remove front brake caliper mounting bolts (arrows).
  • Remove and suspend brake caliper using stiff wire.
  • Remove front brake rotor.
  • Remove tie rod end from steering knuckle.
  • Remove lower ball joint fasteners and seperate ball joint from lower control arm.
  • Remove drive axle.
  • Remove strut bolts (arrows).
  • Remove steering knuckle from vehicle.
  • Mount steering knuckle in vise. Using a flat bladed screwdriver remove axle dust boot.
  • Using a ball joint press, remove ball joint from steering knuckle.
  • Remove wheel hub fateners (arrows) and remove wheel hub from steering knuckle.
  • Installation is reverse of removal.

    Torque Specifications

    Front wheel hub to steering knuckle

    56 Nm (41 ft-lb)

    Front lower ball joint to steering knuckle (castle nut)

    71 Nm (52 ft-lb)

    Lower ball joint to control arm

    89 Nm (66 ft-lb)

    Front strut to steering knuckle

    153 Nm (113 ft-lb)

    Front brake caliper to steering knuckle

    109 Nm (81 ft-lb)

    Front axle nut to wheel hub

    216 Nm (159 ft-lb)

    Wheel to wheel hub

    103 Nm (76 ft-lb)

    Tie rod end lock nut

    74 Nm (54 ft-lb)

    Ties rod end to steering knuckle

    49 Nm (36 ft-lb)

Front wheel hub - bearing, removing and installing

  • No labels
Log in