Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Column
width65%

Camshaft sensor fault cause

These faults can be caused by a faulty camshaft sensor or poor electrical connection.

The sensor may be damaged if the connector is loose, which could allow the blue sealing ring to be pushed out. If this occurs, the connector is no longer sealed against moisture.

Procedure

If camshaft sensor faults are stored, work though all corresponding test plans, using the latest version of ISTA.

If any of the faults 2968, 296B, 2982, or 2983 are stored, follow the procedure below:

Replace the camshaft sensor (refer to the EPC) and the camshaft connector using P/N 12 52 7 590 939.

After the repairs are completed, perform a function check and clear the fault memory entries.

Column
width35%
Warning
titleBefore Performing any Work

Please read Warnings & Cautions before proceeding with any work on your vehicle

Panel
borderColor#999
bgColor#fff
titleBGColor#ddd
titleRelated Technical Manuals

More MINI products...

 

 

Panel
borderColor#999
bgColor#fff
titleBGColor#ddd
titleTechnical Discussion Forums
RSS Feed
titleBarfalse
max5
showTitlesOnlytrue
urlhttp://tech.bentleypublishers.com/rss/rssthreads.jspa?forumID=125

more...

Subscribe to RSS feed

Log in